DLINK DCS-900W Camera

DLINK DCS-900W Camera





IP address will also return to the default setting of 192.168.0.20

http://www.dlink.com/products/?sec=0&pid=270
http://www.dlink.com/products/support.asp?pid=270&pv=86&sec=0
http://www.dlink.com/products/support.asp?pid=270&sec=0#applications

Reset Button
Reset will be initiated when the reset button is pressed once and Power LED begins to
flash.
Factory Reset will be initiated when the reset button is pressed continuously for three
seconds or when the Power LED begins to light up. Release the reset button and the
Power LED will begin to flash indicating that the DCS-900’s settings are reverting back
to the factory settings. The IP address will also return to the default setting of 192.168.0.20.

Uses a java applet class xplug.class

D-Link DCS-900W

Model	: DCS-900W
	Firmware Version	: 2.20 (2003-10-25)
	Mac Address	: 00 0D 88 73 02 C7
	IP Address	: 192.168.1.11

default IP address of 192.168.0.20

To reset this device push a paper clip (or other pointy device) into the reset hole for 10 seconds.  When it comes back to power it will have IP=192.168.0.20/255.255.255.0.
Set your computer's Ethernet connection to manual and give it a network friendly IP address. (e.g. 192.168.0.23/255.255.255.0).  Connect an ethernet cable directly from computer to the DCS-900W.  Then, from your computer's browser, go to http://192.168.0.20 to see the home screen of the device.

 
 
   
   
 
 
 


 
 
   

   
     
CS-7302C7